Download: How to build an oil siphon furnace burner step by step

By evildrome


TIP: Right-click and select "Save link as.." to download video

Initializing link download... Initializing link download.....

This is the first of two videos showing you how I made my oil siphon burner. It uses a HAGO siphon nozzle. The nozzle requires plumbing in with a oil line and a low pressure air line.

This is the nozzle body with 1/8th air fitting

This is the same body, only difference is it has a 1/4 air fitting

This is the 1gph nozzle

I feel that 1gph is too much and mine runs with the fuel valve cracked open a smidge. I'd go with the 0.75 or 0.50gph nozzle

0.75gph nozzle
0.5gph nozzle

So my personal recommendation is the 1/4 body HAGO_030L4068 with the 0.75gph nozzle HAGO_030L2157.