Download: Clone 4D - Router Duplicator / Copy Carver - Joinery - Cutting a Tenon & Open Mortise

By Jackdaw Innovation


TIP: Right-click and select "Save link as.." to download video

Initializing link download... Initializing link download.....

Using the depth stop, rotating router head, rail locks and rail stops, this video demonstrates the cutting of a tenon and an open mortise.

0:04 Fine adjustment to the depth stop is made for precise cutting of the tenon.

0:13 Depth stop is locked in place.

0:16 The length of the tenon is set by adjusting the stops on the router assembly.

0:33 Cutting the top face of the tenon begins.

1:11 The work piece is rotated 180 degrees and the 2nd face of the tenon is cut.

1:51 Cutting of the tenon is complete.

1:56 The router head is set to the horizontal position in order to cut the open mortise.

2:04 Depth of the cut is set using the main rail lock and stops.

2:15 Cutting the open mortise begins.

3:08 Cutting of the open mortise is complete.